The Top 5 Common Plumbing Problems and How to Fix Them

The Top 5 Common Plumbing Problems and How to Fix Them 1

Leaky Faucets

Leaky faucets are one of the most common and annoying plumbing issues. Not only they are wasteful of water, but they also increase your water bill. The problem occurs when the washers in the faucet become damaged or worn out, leading to a drip in the faucet. The first thing to do is shut off the water supply under the sink. Next, remove the handle of the faucet and loosen the nut under the handle. You can then access the washer, which will need to be replaced. Reassemble the faucet and turn on the water supply to test it out.

Clogged Drains

A clogged drain can cause a lot of inconvenience in your home. It is often caused by the accumulation of hair, food particles, soap scum, and other foreign objects. There are several DIY solutions that you can try to unclog your drain. First, try pouring boiling water down the drain. If that doesn’t work, try using a plunger. You can also use a mixture of baking soda and vinegar, followed by hot water. For stubborn clogs, a drain snake may be needed. Remember to take precautions when attempting to unclog your drain to avoid more damage. We’re always working to provide an enriching experience. That’s why we suggest this external resource with extra and relevant information about the subject. Learn more from this external source, dive into the topic!

The Top 5 Common Plumbing Problems and How to Fix Them 2

Running Toilets

A running toilet can be problematic and wasteful, as it can waste hundreds of gallons of water every day. The problem is usually caused by a faulty flapper valve or the fill valve. First, remove the lid of the toilet tank and inspect the rubber flapper. If it is damaged, it needs to be replaced. Another issue may be the fill valve, which may need to be replaced if it is not working properly. If neither solution works, it may be time to call in a professional plumber.

Low Water Pressure

Low water pressure can hamper your daily routine, from taking a shower to washing dishes. It is usually caused by mineral build-up or a clog in the faucet’s aerator. To fix the issue, start by removing the aerator from the faucet and cleaning any debris build-up. If this does not solve the issue, check your water main valve to ensure that it is fully open. If the problem persists, it may be necessary to call in a plumber to diagnose and fix the issue.

Sump Pump Failures

If you have a basement or a crawlspace, you know how important a sump pump is to keep water out of these areas in case of flooding. A sump pump failure can result in disastrous consequences. The good news is that there are ways to prevent the pump from failing. You should check the pump periodically and remove any debris from the inlet screen. If the pump is not working, the first thing to check is the float switch to ensure that it is free of obstruction. If that doesn’t solve the issue, call a professional plumber for assistance. Our dedication lies in offering a fulfilling learning experience. That’s why we’ve selected this external website with valuable information to complement your reading on the topic. Gareth Davies Penrhynside Heating!


Plumbing problems can be frustrating and inconvenient. However, with the right knowledge and tools, you can fix many common issues yourself. However, when in doubt, it is always better to call a professional plumber to ensure that the issue is fixed properly to avoid further damage or complications.

To learn more, visit the related posts we suggest next:

Uncover details

Compare here

Recommended Articles